Release 2.29.0

- [FEATURE] QUIC and HTTP/3 Internet Draft 34 support and v1 support.
The latter is turned off by default.
- Drop support for ID-28 and ID-32.
- [BUGFIX] IETF QUIC mini conn receive history (trechist): allow
unlimited inserts by dropping smallest elements.
- [BUGFIX] gQUIC: set STTL to correct value, issue #226.
- [BUGFIX] Account for poison packet gap when MTU probe was too large.

Release 2.28.0

- [API] lsquic_ssl_sess_to_resume_info() is the new way to get
session info.
- [API] Add user pointer to ea_generate_scid callback.
- [API] Add lsquic_dcid_from_packet() -- a fast function to parse
out DCID.
- [API] Add es_max_batch_size to control outgoing packet batch size.
- [BUGFIX] Disallow sending of header while promise is being written.
- [BUGFIX] Flush stream when buffered bytes exhaust stream cap.
- [BUGFIX] Deactivate HQ frame if writing push promise fails.
- Perform sanity check on peer transport parameters and fail the
handshake if some flow control limits are too low. This can be
turned off, see es_check_tp_sanity.
- http_server: fix how requests are read in "hq" mode.

Fix typo in API docs

API: add lsquic_conn_get_sni(), fixes issue #203

Release 2.27.1

- [API] New knob to set outgoing packet batch size.
- Aborted connection now become tickable immediately.
- Abort connection when HTTP/3 frame cannot be opened (can only happen
when malloc fails).

Release 2.27.0

- [API] Remove keylog callbacks. See issue #188.
- Add a bit more ALPN logging.

Release 2.26.2

- [BUGFIX] Do not drop incoming data when STOP_SENDING is received.
- [BUGFIX] Receipt of STOP_SENDING should not cause read-reset.
- [BUGFIX] Allow stream writes after receiving RESET.
- [BUGFIX] Typo in stream: ANDing enum with wrong flag.
- [BUGFIX] Reset elision: do not use zero as special stream ID value,
for zero is a valid stream ID in IETF QUIC.
- [API] Add optional on_conncloseframe_received() callback.
- Use zero error code in RESET stream sent in response to STOP_SENDING.

Release 2.26.0

- [OPTIMIZATION] Adjust packet reordering threshold when spurious losses
are detected.
- [API] Pass pointer to local sockaddr to ea_get_ssl_ctx() callback.

Release 2.25.0

- [API, FEATURE] Add es_delay_onclose option to delay on_close until all
data is ACKed. Use new function lsquic_stream_has_unacked_data() to
learn whether peer acknowledged all data written to stream.
- [API] Add optional on_reset() stream callback to get notifications
when RESET or STOP_SENDING frames are received.
- [BUGFIX] On STOP_SENDING, make conn tickable is _writeable_, not
readable.

Release 2.24.5

- [FEATURE] Improve Delayed ACKs extension and turn it on by default.
- Limit receive history to a finite amount of memory.

Release 2.24.0

- [FEATURE] QUIC and HTTP/3 Internet Draft 31 support. Drop ID-30
and ID-31 support.
- [BUGFIX] Divide-by-zero in newly enabled conn stats code when no
packets were sent.
- [BUGFIX] Memory leak in gQUIC client when server hello cannot be
parsed.
- [BUGFIX] Server Initial packet size calculation.
- Log user-agent and CONN_CLOSE reason when peer reports error.
- Example programs: Specify ALPN for echo and md5 clients and servers
(issue #184).
- Example programs: Don't add "QUIC_" prefix to lines in keylog file
(issue #185).
- http_server: Fix fd leak in preadv mode; fix preadv() usage when
reading from disk.

Release 2.23.2

- Add QPACK stats collection and experimentation mode, see the new
es_qpack_experiment setting.
- Log busy connection stats every second using the new "conn-stats"
log module.
- Log about skipping only once.
- Update HTTP/3 greased frame type formula.
- Use ls-qpack v2.2.1.

Release 2.23.0

- [FEATURE] IETF Client 0-RTT support.
- [BUGFIX] Do not schedule MTU probe on first tick.
- [BUGFIX] Parsing DATAGRAM frame.
- [BUGFIX] If push promise fails, do not invoke hset destructor.
- [BUGFIX] Client: When connections are IDed by port number, check DCID.
Fixes issue #176.
- Revert the 2.22.1 lsquic_is_valid_hs_packet change. All that was
necessary is a change to the way we call it in lsquic_engine. No
change to the function itself is required.

Release 2.22.0

- [FEATURE] Extensible HTTP Priorities (HTTP/3 only).
- [FEATURE] Add conn context to packet-out memory interface (PR #175).
- [BUGFIX] gQUIC proof generation: allocate buffer big enough for
signature (issue #173).
- [BUGFIX] Make library thread-safe: drop use of global variables
(issue #133, issue #167).
- [BUGFIX] Deactivate only *recent* HQ frame, not any HQ frame.
- [BUGFIX] gQUIC server: associate compressed cert with SSL_CTX,
instead of keeping them in a separate hash, potentially leading
to mismatches.
- [BUGFIX] Stream data discard infinite loop: break on FIN.
- cmake: add install target via -DCMAKE_INSTALL_PREFIX (PR #171).
- Support randomized packet number to begin a connection.
- Mini and full IETF connection size optimization.
- http_client: specify HTTP priorities based on stream conditions.

GSO-Friendly Packet Memory (#175)

Release 2.21.0

- [FEATURE] QUIC and HTTP/3 Internet Draft 31 support.
- [API] Let user generate Souce Connection IDs.
- [FEATURE] Allow building lsquic as shared library.
- [OPTIMIZATION] Receive history: use a single contiguous memory
block for everything.
- Deprecate QUIC versions ID-27 and ID-30.

Release 2.20.1

- [BUGFIX] Typo in new "validate peer addr by DCID" code. It is
a benign bug (works either way), but better to fix it.
- Simplify Stream Priority Iterator (SPI).
- Minor documentation updates.

Release 2.20.0

- [FEATURE] QUIC and HTTP/3 Internet Draft 30 support.
- [FEATURE] Unreliable Datagram Extension support.
- [FEATURE] Adaptive congestion controller.
- [BUGFIX] Do not send MAX_STREAM_DATA frames on crypto streams.
- [BUGFIX] Fail with CRYPTO_BUFFER_EXCEEDED when too much CRYPTO
data comes in.
- [BUFFIX] Spin bit is now strictly per path; value is reset on
DCID change.
- [BUGFIX] Check that max value of max_streams_uni and
max_streams_bidi TPs is 2^60.
- [BUGFIX] Close IETF mini conn immediately if crypto session
cannot be initialized.
- Deprecate ID-28 (no browser uses it): it's no longer in the
default versions list.
- New programs duck_server and duck_client that implement the
experimental siduck-00 protocol. They quack!
- IETF crypto streams: don't limit ourselves from sending.
- Command-line programs: turn off QL loss bits if -G is used, as
Wireshark cannot decrypt QUIC packets when this extension is used.
- Turn all h3 framing unit tests back on.
- Fix malo initialization when compiled in no-pool mode.

Release 2.19.9

- [FEATURE] Add lsquic_stream_pwritev(). This function allows one to
reduce the number of system calls required to read a file from disk
by using lsquic_stream_pwritev() together with preadv(2).
- [BUGFIX] When stream is reset, it is writeable -- let user collect
the error.
- [BUGFIX] Calculate correct conn flow control if reading ends early.
- [BUGFIX] Remove stream from read and write queues on internal
shutdown. This is a regression introduced in 2.19.7.
- [BUGFIX] Swapped arguments in IETF RESET_FRAME generation.
- Turn off mini conn history when compiling with Visual Studio; this
allows the project to compile on Windows again.
- http_client: Add -3 flag to stop reading from streams early; code
cleanup.
- Don't use -Werror.

Release 2.19.7

- Handle ECT-CE event: issue a loss event.
- Log the fact that we ignore SETTINGS_MAX_HEADER_LIST_SIZE.
- Use Max Push ID in GOAWAY frame to cancel promises.
- Add support for HTTP/3 CANCEL_PUSH frame.
- lsquic_stream_is_pushed: streams without headers are never pushed.
- [BUGFIX] Regression in lsquic_stream_shutdown_internal: now it shuts down.
- Improve logic whether to generate CONNECTION_CLOSE.

Release 2.19.2

- [BUGFIX] Do not reduce PLPMTU size by network overhead.
- [BUGFIX] Windows build.

Release 2.19.0

- [FEATURE] DPLPMTUD support. IETF connections now search for the
maximum packet size, improving throughput.
- [DEBUG] Record event in stream history when on_close() is called
in dtor.

Release 2.18.1

- [FEATURE] Implement the "QUIC bit grease" extension.
- [BUGFIX] Selecting CID used for logging on client.
- [BUGFIX] Header protection assertion.
- [BUGFIX] Server: enable SSL key logging when cert lookup callback
is not set.
- Remove some dead code.

Release 2.18.0

- [API] Rename "0-RTT" to "session resumption." In IETF QUIC, "0-RTT"
always refers to early data, meaning a request that the server can
reply to in the very first return flight. A more appropriate name
for what we support on the client site is "session resumption," which
is standard TLS terminology. Later, when we add support for 0-RTT
(early data), we can use the 0-RTT terminology again, this time in
proper context.
- [BUGFIX] Do not set certificate callback if ea_lookup_cert is NULL.
- [BUGFIX] Make connection tickable when it's marked as closed.
- [BUGFIX] Fail certificate lookup if SNI is not present in HTTP mode.
- Several documentation fixes and improvements.
- Minor code cleanup.

Release 2.16.1

- [FEATURE] Use "no-progress timeout" after which connection is closed.
- [BUGFIX] Select new SCID when current SCID is retired.
- [BUGFIX] Don't warn about dropped Initial packet sequence gaps during
mini/full handoff.
- [BUGFIX] Send correct conn error when HTTP/3 frame is truncated.
- [BUGFIX] Mini conn: consider amplification when deciding to return
TICK_SEND.
- [BUGFIX] Don't double-count tag length in amplification logic.
- [BUGFIX] Don't squeeze out lone path challenges.
- [BUGFIX] Log messages dealing with scheduled packet queue squeezing.
- [BUGFIX] don't wipe current path if no path challenge responses
come back.
- [BUGFIX] When path is reset, don't lose path_id which is used for
logging.
- Downgrade flow control violations to info log level from warnings.
- Fix connection cap extra check, avoid checks in nested calls.
- Fix some unit tests when extra checks are enabled.
- Use ls-hpack 2.2.1.
- Turn off unconditional extra checks for IETF clients.
- Extra checks: don't verify sent size of hello packets. Client
changes DCID length and this check will fail.

Fix Windows support

Release 2.15.0

- [FEATURE] QUIC and HTTP/3 Internet Draft 28 support.
- [BUGFIX] Ignore Retry packets after other packets are decrypted
successfully.
- [BUGFIX] Transport parameter decoding: CID no longer has 4-byte
length minimum.
- http_client: fix and optimize lsxpack_header allocator.
- Drop support for Internet Draft 25.

Release 2.14.3

- [BUGFIX] gQUIC: pass correct stream to hsi_create_header_set() callback.
- [BUGFIX] Use ls-hpack 2.1.1
- Improve stream code readability.
- Use ls-qpack 2.0.5

Release 2.14.2

- [BUGFIX] Use ls-qpack 2.0.4
- [BUGFIX] Honor max packet size on the client and when path changes.
- http_server: fix prepare_decode() function.

Release 2.14.0

- [API] Use lsxpack_header structure to send HTTP headers.
- [OPTIMIZATION] nocopy's readable_bytes() function.
- http_server: fix typo in error message
- Use ls-hpack 2.1.0.
- Use ls-qpack 2.0.0.

Release 2.13.2

- [BUGFIX] Use of new lsxpack_header API's hsi_prepare_decode().

Release 2.13.0

- [API] Use lsxpack_header structure to process incoming headers.
- [BUGFIX] Fix assertion when zero-padding Initial packet.
- [BUGFIX] Use idle timeout before we learn of peer's value.
- Use ls-hpack 2.0.0 -- has lsxpack_header changes.
- Use ls-qpack 0.14.0 -- new, common with ls-hpack, XXH seed (not used yet).
- Code cleanup: prefix exported functions with "lsquic_".

Release 2.12.0

- [FEATURE] QUIC timestamps extension.
- [API] New: ea_alpn that is used when not in HTTP mode.
- [BUGFIX] SNI is mandatory only for HTTP/3 and gQUIC.
- [BUGFIX] Benign double-free -- issue #110.
- [BUGFIX] Printing of transport parameters.

Release 2.11.0

- [FEATURE] QUIC and HTTP/3 Internet Draft 27 support.
- [FEATURE] Add experimental delayed ACKs extension.
- Drop support for Internet Draft 24.
- Code cleanup.

Add experimental support for delayed ACKs extension

Switch to readthedocs.org for hosting documentation

Add API reference.